ONLINE REGISTRATION IS CLOSED. PLEASE CONTACT THE CHAPTER OFFICE TO REGISTER.

ACCESSING SAFETY KNOWLEDGE (ASK) EDUCATION SERIES: 

Best Practices of a Safety and Health Program

A panel of industry representatives discuss best practices regarding safety and health programs. This is a stand-alone session as well as the third and final session of the three-session series "Developing and Implementing a Safety and Health Program for Small Construction Companies," an educational series that will assist the small construction company through the development and implementation of a safety and health program.

PANEL PARTICIPANTS
General Contracting Company
Susan Phillips, Tellepsen

Subonctracting Company
Mike Holland, Marek Brothers Systems, ASA-HC President

Loss Prevention
Bill Lease, Brady Chapman Holland & Associates, Inc.

OSHCON
William Irvin

OSHA
Jim Shelton

Owner's Rep
Sarah Werner, Chevron

Moderator
Timothy Brady, Brady Chapman Holland & Associates, Inc.

REGISTRANTS AS OF 3/7/10
A&E - The Graphics Complex: Kim Muncy
American Marble Mosaic Co.: Nora Bertin, Yolanda Gassert
Big City Access Inc.: Keith Falks
Building Specialties: John Juzswik
Diversified Thermal: Albert Shanks
Fast Track Specialties, Inc.: Drew Yoder, John Glaze
Holes Incorporated: Kim Mason
JMP & Associates, LLC: John Johnson
L.A.A.P., Inc.: Pat Patterson
Oxford Builders: Dale Dirkes, Luis Maldonado, Marcos Marin, Larry Wood
Safety By Design: Lee Hart
Slack & Co. Contracting, Inc.: David Felgere, Alex Joseph, Joe Lopez, Ann Maestre
Texas Moisture Protection Co.: Tyler Althouse, Doug Desilvio

FULL SERIES DETAILS

Registration Price*: $30 before or on March 2 / $40 after March 2 (non-members add $10 to price)
* This session is included in the registration price for the individuals who registered for the entire series.

Location: Brady, Chapman, Holland & Associates, 10055 West Gulf Bank, Houston, Texas - PLEASE NOTE: USING A GPS OR ONLINE MAPPING SYSTEM MAY NOT GET YOU TO THE LOCATION, PLEASE BE SURE TO TAKE A COPY OF THE DIRECTIONS:

For all of these directions, you will enter from the W. Gulf Bank side. The Beltway side is exit only. It is a one store brown and maroon building.
From 610 - Take 290 W to the Beltway 8 feeder road exit. Go right on the feeder road. Our office is on the right at the corner of W. Gulf Bank and Beltway 8. Take a right at W. Gulf Bank and pull into the first entrance.
From 45 - Take Beltway 8 west to the West Road exit. If you hit 290 you have gone too far. Go straight on the feeder road until the third light (W Gulf Bank). Take a left and our building is just inside the beltway on the right.
From Cypress - Take 290 to the Beltway 8 access road exit. Go through the light and hang a left at the Beltway 8 Northbound feeder road. Take a right at W. Gulf Bank and pull into the first entrance.
From Katy - Take Beltway 8 North Bound to the W. Little York exit. Continue straight until the 290 feeder road and go right. Turn left at the Beltway 8 Northbound feeder road. Take a right at W. Gulf Bank and pull into the first entrance.

Cancellation Policy: Registration cancellations received on or after Tuesday, March 2, 2010 will be billed the registration price.

ASA-HC_Best_Practices_of_a_Safety_and_Health_Program.pdf